Aker BP boasts new well stimulation method offshore

Norwegian oil and gas company Aker BP has executed the first successful “Single-Trip Multi-Frac” campaign on the Valhall field located offshore Norway. This specific method of well stimulation has never been done offshore before, according to Aker BP. 

The method significantly reduces the cost of the well because less time is needed for use of vessels and equipment, Aker BP explained in a statement on Tuesday.

“The traditional method takes two-three days to fracture a single zone of the reservoir. With ‘Single-Trip Multi-Frac’, we can now do two zones in a day. We also see a potential for doing this more efficiently,” said Stian Ø. Jørgensen, head of the the Well Intervention and Stimulation Alliance in Aker BP.

“The new method will make implementation of several projects possible,” said Tommy Sigmundstad, SVP Drilling and Well in Aker BP.

He added: “It provides more flexibility; we spend less time per well, and it decreases the unit cost of the operations. In turn, this results in a reduced price for the stimulation and we can bring the well on stream earlier compared with the conventional stimulation method that has been used. Therefore, we see a substantial upside through use of this stimulation method.”

According to Aker BP, the Valhall field has always needed stimulation to maximize production from the wells. This is because the field consists of chalk formations with low flow rates. A stimulation vessel and coiled tubing are needed for this operation.

The actual stimulation takes place by creating fractures in the reservoir, by high pressure pumping in sand mixed with a fluid system into the reservoir. The process is called fracturing and contributes to improve flow. Several zones in the reservoir must be fractured, and with the normal method, the coiled tubing is pulled out completely for each zone – an extensive and time-consuming process.

“What’s new about ‘Single-Trip Multi-Frac’ is that several zones can be fractured with just one trip down into the well. This is done with the aid of a sleeve installed in the completion that can be opened and closed down in the well,” explains Jørgensen.

This allows the company to pump sand mixed with a fluid system into the well, while the coiled tubing remains in the hole the entire time. When one zone has been fractured, it is closed and moved on to the next zone.

A total of four zones were stimulated using the new method during the ‘Single-Trip Multi-Frac’ campaign on the G10 well at the Valhall field centre in November. Three of the zones were stimulated on just one trip down in the well. The same method was also successfully applied on the first well on Valhall Flank West.

Valhall has produced one billion barrels since the field opened in 1982. The ambition is to produce another billion barrels.

“This method of well stimulation will be an important contribution to ensure that we achieve our ambition,” said Jørgensen.

Culmination of five-year work

The ‘Single-Trip Multi-Frac’ method is well-known on land, including for production of shale oil in the US, but putting this method to use in new and more complex conditions 3,500 metres down in the well was no easy task. Aker BP and its partners NCS Multistage, Stimwell Services, and Schlumberger have worked almost five years to solve the challenges.

“When you want to develop pioneering technology or methods, you have to dare to fail. That’s how you finally end up with a good and proven result,” said Jørgensen.

“The biggest challenge has been that the coiled tubing has become stuck and we have not been able to break loose. We have worked quite a lot on understanding the ‘energy regime’ in the well. We have also optimized the tool at the end of the coiled tubing and worked intensively with the fluid system to reduce the risk of getting stuck,” he said.

Jørgensen emphasised that Aker BP would continue to stimulate wells in the traditional manner in reservoirs where this is considered to be the best method.

Spotted a typo? Have something more to add to the story? Maybe a nice photo? Contact our editorial team via email.

Also, if you’re interested in showcasing your company, product or technology on Offshore Energy Today, please contact us via our advertising form where you can also see our media kit.